详情

Henga Instrument 恒港仪器 - 环境模拟试验：户外曝晒试验测试标准一览

ASTM C1589

Standard Practice for Outdoor Weathering of Construction Seals and Sealants

This practice describes outdoor exposure procedures used to determine the weathering durability of building construction, seals and sealants.

ASTM C1589

建筑密封件和密封剂户外老化的标准测试方法

本测试方法描述了用于测定建筑结构密封件和密封剂老化耐候性的户外曝露测试程序。

ASTM D1006

Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood

This practice covers procedures to be followed for direct exposure of house and trim paints on new, previously unpainted wood materials to the environment.

ASTM D1006

木器涂料外观曝露测试的标准测试方法

本测试方法规定了对房屋和新的、以前未上漆的木质材料上的装饰涂料直接曝露在环境中要遵循的程序。

ASTM D1014

Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates

This practice covers procedures to be followed for direct exposure of exterior paints and coatings to the environment when applied to metal surfaces.

ASTM D1014

金属底板上油漆和涂料外观曝露测试的标准测试方法

本测试方法规定了对用于金属表面的外部油漆和涂料直接曝露在环境中要遵循的程序。

ASTM D1435

Standard Practice for Outdoor Weathering of Plastics

This practice is intended to cover procedures for the exposure of plastic materials to weather. Note 1See Practice G 24 for aging under glass.

ASTM D1435

塑料户外老化标准测试方法

本测试方法旨在规定塑料材料进行曝露老化测试的程序。 请参见测试方法 G 24 玻璃下老化现象。

ASTM D3456

Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack

This practice provides guidelines for determining the susceptibility of paint films to microbiological attack on exterior exposure. While it is recognized that various organisms may occur on an exposed coating, the specific types of organisms are mainly of academic interest. The degree to which microbiological discoloration occurs is the primary concern.

ASTM D3456

漆膜对微生物攻击的敏感性的外部曝露测定的标准测试方法

本指南对测定曝露在外部的漆膜受微生物攻击的影响提供指导。 虽然人们认识到，曝露的涂层上可能会出现各种生物体，但研究的重点主要集中在特定类型的生物体上。 在微生物变色的程度是首要关注的问题。

ASTM D3679

Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding

This specification establishes requirements and test methods for the materials, dimensions, warp, shrinkage, impact strength, expansion, appearance, and windload resistance of extruded single-wall siding manufactured from rigid (unplasticized) PVC compound. Methods of indicating compliance with this specification are also provided.

ASTM D3679

硬性聚氯乙烯（PVC）墙板标准规范

本规范规定了对挤压单壁壁板的要求和测试方法，包括材料、尺寸、翘曲、收缩、冲击强度、膨胀、外观和风阻，壁板由刚性（未增塑）PVC复合物制造而成。 还提供了表明符合本规范的方法。

ASTM D5970

Standard Test Method for Deterioration of Geotextiles from Outdoor Exposure

This test method covers evaluating the deterioration in tensile strength and strain after outdoor exposure.

ASTM D5970

土工布户外曝晒老化的标准测试方法

该测试方法规定了户外曝露后的拉伸强度和应变退化的评估。

ASTM G7

Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials

This practice covers procedures to be followed for direct exposure of nonmetallic materials to the environment. When originators of a weathering test have the actual exposure conducted by a separate agency, the specific conditions for the exposure of test and control specimens must be clearly defined and mutually agreed upon between all parties.

ASTM G7

非金属材料大气环境曝露试验的标准测试方法

本测试方法是非金属材料直接曝露在环境中的操作程序。当老化测试客户委托独立的机构进行实际曝露测试时，暴露测试和样品制备的具体情况必须明确界定，且试验各方之间必须达成共识。

Ford FLTM BI 160-01

Florida and Arizona Outdoor Exposure Test

Ford FLTM BI 160-01

佛罗里达和亚利桑那的户外曝露测试

GMW 14873

Outdoor Weathering of Automotive Exterior Materials

GMW 14873

汽车外饰材料户外老化

IEC 61215

Crystalline Silicon Terrestrial Photovaltalic (PV) Modules - Design Qualification and Type Approval

IEC 61215

地面用晶体硅光伏组件（PV）－设计鉴定和定型

ISO 2810 (EN) (DIN)

Paints and Varnishes - Notes for Guidance on The Conduct of Natural Weathering Tests

ISO 2810 (EN) (DIN)

色漆和清漆 - 自然老化测试实施的指导注意事项

LP463-KB19-01

Outdoor Exposure of Trim Materials

LP463-KB19-01

装饰材料的户外曝露

LP463-PB34-01

Florida Exposure Testing of Painted Surfaces

LP463-PB34-01

油漆表面佛罗里达测试